INNER TUBE: oil resistant synthetic nitrile rubber. REINFORCEMENT: single layer of steel wire braided. COVER: Black, oil resistant, synthetic rubber. SURFACE: wrapped surface,smooth surface. Hydraulic Rubber Hose SAE100 R1 TEMPERATURE RANGE: -40℃（-104℉） to +100℃ （+212℉）. Hydraulic Rubber Hose SAE100 R1 Standard: SAE 100 R1 AT.
Hose Nuer Inside Diameter Outside Diameter Maximum Working Pressure (MWP) Minimum Burst Pressure Minimum Bend Radius R1-04 1/4" 0.53" 2,750 psi 11,000 psi 4" R1-06 3/8" 0.69" 2,250 psi 9,000 psi 5" R1-08 1/2" 0.82" 2,000 psi 8,000 psi 7"
SAE 100R1AT Hydraulic Hose, One Wire Braid Hydraulic Hose. Up to 2,750 PSI Max in 1/4 size. 4:1 safety rating on all R1 hoses Inner tube: Oil-resistant synthetic rubber Recommended for hydraulic system service with petroleum and water-base fluids, or general
China Hydraulic Hose alog of Factory Direct R1 R2 R7 R8 Oil Resistant High Temperature Black Hydraulic Rubber Hose, Fire Resistant High Pressure Hydraulic Lines 1 2 Inch Size Available SAE 100 R2 Hydraulic Hose provided by China manufacturer - Qingdao
Liner OIl Resistant synthetic rubber Reinforcement One braid of high tensile steel wire Appliion High pressure hydraulic Hydraulics Oils from -40 C to 100 C (from -40 F to 212 F) Water Glycol Hydraulic Fluids from -40 C to 70 C (from -40 F to 158 F) Water
1 layer high-pac construction – characteristics according to SAE 100 R16, for hydraulic appliions up to +125 C, transportation, agriculture, power steering etc. 21,0 MPa constant pressure SAE100 R17 hose, with extra abrasion resistant Tough Cover 1 & 2
SAE 100 R2 steel wire reinforced hydraulic hose is suitable for delivering petroleum-based hydraulic oils thanks to its oil resistant tube. Besides, it can convey the oils without producing excessive heat and leak. It is mainly used in some mobile equipment, such as …
MANUFACTURER OF LOW PRESSURE AND HIGH PRESSURE HYDRAULIC HOSE PIPE LIKE SINGLE WIRE BRAIDED HYDRAULIC HOSE SAE 100 R1. Construction TUBE- Black, oil-resistant synthetic rubber NBR REINFORCEMENT- Single braided high
1 High Tensile Steel Wire Braid. Black, Oil, Weather and Abrasion Resistant Synthetic Rubber. MSHA Approved. Safety Factor: 4:1. Temperature Range: -40°F to 212°F (-40°C to 100°C) Intermittent Service 248°F (120°C) Maximum Temperature Recommended for Water Base Hydraulic Fluid 158°F (70°C) Maximum Temperature Recommended for Air 140°F
INNER TUBE: oil resistant synthetic nitrile rubber. REINFORCEMENT: single layer of steel wire braided. COVER: Black, oil resistant, synthetic rubber. SURFACE: wrapped surface,smooth surface. Hydraulic Rubber Hose SAE100 R1 TEMPERATURE RANGE: -40℃（-104℉） to +100℃ （+212℉）. Hydraulic Rubber Hose SAE100 R1 Standard: SAE 100 R1 AT.
1 layer high-pac construction – characteristics according to SAE 100 R16, for hydraulic appliions up to +125 C, transportation, agriculture, power steering etc. 21,0 MPa constant pressure SAE100 R17 hose, with extra abrasion resistant Tough Cover 1 & 2
Liner OIl Resistant synthetic rubber Reinforcement One braid of high tensile steel wire Appliion High pressure hydraulic Hydraulics Oils from -40 C to 100 C (from -40 F to 212 F) Water Glycol Hydraulic Fluids from -40 C to 70 C (from -40 F to 158 F) Water
Hose Nuer Inside Diameter Outside Diameter Maximum Working Pressure (MWP) Minimum Burst Pressure Minimum Bend Radius R1-04 1/4" 0.53" 2,750 psi 11,000 psi 4" R1-06 3/8" 0.69" 2,250 psi 9,000 psi 5" R1-08 1/2" 0.82" 2,000 psi 8,000 psi 7"
R2-1/4 SAE 100R2 AT $1.18 R2-3/8 SAE 100R2 AT $1.42 R2-1/2 SAE 100R2 AT $1.90 R2-3/4 SAE 100R2 AT $2.40 R2-1 SAE 100R2 AT $3.00 Check the items you …
SAE 100 R1 AT / SAE 100 R16 High Temperature Hoses Parker 426, 1 wire hose is perfect for both internal and external high-temperature appliions. Used in foundry, injection molding, fleet oil cooler lines and ideal for thermal transfer fluids. Parker’s NEW 426
SAE 100 R1 steel wire reinforced hydraulic hose with 1/2" diameter and 160 bar working pressure. Structure: it is composed of three parts: tube, reinforcement and cover. Tube: high quality oil resistant synthetic rubber, making the hose work well in delivering oils. Reinforcement: one layer of high tensile braided steel wire, making the hose
SAE 100(R1-R19) SAE 100R1 Construction: This hose shall consist of an inner tube of oil resistant synthetic rubber, a single steel wire braid reinforcement, and an oil and weather resistant synthetic rubber cover. Specifiion: Metric Size SAE Dash Size ID Min
Marking on the hose: Ho 1SN DN 25 DIN/EN 853 - Exceeds SAE 100 R1 AT 1" - 25.4 MM - WP 8.8 Mpa/88Bar/1276PSI - MSHA Applicable standards: SAE100 r1 at ( din en 853 1sn ) Appliions: Low - Medium pressure lines, Return Lines
J-FLEX® 1 1SN/SAE 100R1AT Hydraulic Hose. For low to medium pressure hydraulic systems in industry and agriculture. The synthetic rubber tube is resistant to hydraulic fluids, and the MSHA approved synthetic rubber cover is abrasion and ozone resistant. Various covers are available for this hose. 1/4" to 1" ID.
Specifiion : SONI-SAE 100 R1. Appliion : Medium Pressure Hydraulic Oil Lines, Fuel OH, Gasoline, Air and Water. Construction : Tube : Black, Oil Resistant Synthetic Rubber, Reinforcement : One ply braided High Tensile Steel Wire. Cover: Oil Weather and abrasion resistant synthetic Rubber. Temperature : -40°F to +212°F, Impulse Cycles
Size. 1/2 inch, 3/4 inch, 1 inch, 2 inch, 3 inch. Fluid Type. Water. Reinforcement. High Tensile Synthetic Plies. Surface Type. Smooth Fabric Marked Green Synthetic Rubber, Heat, Weather & Abrasion Resistant. Carbon Free Hose spiral is made by the Galvanized steel and Synthetic textile.
SAE 100 R1AT Hose Construction: Tube: oil resistant synthetic rubber Reinforcement: one high tensile steel wire braid Cover: abrasion and weather resistant synthetic rubber Temperature Range: ‐40 C to +100 C (+120 C max) Hose I.D. I.D. Braid O.D
MANUFACTURER OF LOW PRESSURE AND HIGH PRESSURE HYDRAULIC HOSE PIPE LIKE SINGLE WIRE BRAIDED HYDRAULIC HOSE SAE 100 R1. Construction TUBE- Black, oil-resistant synthetic rubber NBR REINFORCEMENT- Single braided high
12 · Rubber Hose,SAE-100 R1-AT, DIN-EN 853 1SN, High Pressure Hose R1, high pressure …
Hose Nuer Inside Diameter Outside Diameter Maximum Working Pressure (MWP) Minimum Burst Pressure Minimum Bend Radius R1-04 1/4" 0.53" 2,750 psi 11,000 psi 4" R1-06 3/8" 0.69" 2,250 psi 9,000 psi 5" R1-08 1/2" 0.82" 2,000 psi 8,000 psi 7"
SAE 100R1 medium pressure hydraulic hose has high tensile braid wire reinforcement. High abrasion and high temp types are supplied. SAE 100R1 high tensile steel wire braided medium pressure hose SAE 100R1AT single steel wire braided hose is a typical medium pressure hydraulic hose and strongly recommended for hydraulic lines or general industrial system.
